LED Bird Flight Diverter

Our LED Bird Flight Diverter is an essential component in promoting aviation safety by deterring birds from approaching power lines and other structures. These lights emit a highly visible flashing pattern that effectively reduces the risk of bird collisions, thereby safeguarding both avian wildlife and aircraft.

Featuring advanced LED technology, our lights offer superior visibility, ensuring effective deterrence even in low light conditions. This high visibility is critical for alerting birds to the presence of structures and steering them away from potential hazards.

Installation of our LED Bird Flight Diverter Light is straightforward, requiring standard mounting hardware for attachment to power lines, poles, and other structures. Once installed, these lights require minimal maintenance, offering a cost-effective and efficient solution for bird deterrence.

Built to withstand harsh weather conditions, our LED Bird Flight Diverter Light is durable and reliable, ensuring continuous operation in various environments. This weather-resistant design makes it suitable for a wide range of applications, including power lines, communication towers, wind turbines, airport perimeters, and hazardous areas.

In summary, our LED Bird Flight Diverter Light is a vital tool for enhancing aviation safety and reducing the risk of bird collisions. Its advanced LED technology, ease of installation, low maintenance requirements, and weather resistance make it an ideal choice for protecting both birds and aircraft.Contact INSTAPOWER today to learn more about how our lighting solutions can enhance safety and compliance for your project.

• Model Name
• LED Bird Flight Diverter
• Product Description
• Bird protection with snap fast clamp.
• Warning Disc
• Dia. – 230 mm
• THK
• 5.00 mm

• Total Height
• 410 mm
• Weight
• 590 gms
• Clamp Type snap Fast Model-IPL-01-BFD-S
• Clamp is Spring Loaded type suitable for strongly gripping all types of Conductors (ASCR & Others) and other wire of diameters 8mm to 70mm
• Hardware Material
• All Hardwares except the metallic parts are Non Conductive
• Warning Disc and clamp are made of Impact Resistance and UV Stabilized Plastic
• All Suspension Hardware , directly exposed, are made of corrosion free stainless steel which resist salt, spray & adverse weather.
• Motion / Movement
• Stainless steel ball bearing Swivel coupled with the aerodynamic wings allows 360° spinning of the warning disc in extremely low winds
• The Bird Diverter assembly allows the warning Disc to swing and sway along with the rotation, thus altering birds approaching from all the directions.
• Size of Reflection Area
• Min 3500Sq. Mm reflective areas on each face with both sides having different colored rectangular sun and moon reflective stickers manufactured by 3M
• Glow in Dark Property
• stickers with afterglow in low light conditions for a long time.
• Temperature
• No effect in -30°C to +100°C temperatures
• Load Bearing strength of more than 100 kgs for the direct pull test.
• Load Bearing Strength
• Grip Retaining Strength
• Tested in wind Tunnel and proven to successfully retain its position up to wind velocity of 70+ kmph and tested to not slip till load value more than 25kgs for the Clamp Slip test.
• Environmental Impacts / Ageing
• Compliance for Temperature range tests from high to low extremes according to IEC 60068-1 test A and 60068-2 test B
• Compliance for wind & dust test according to MIL-STD 810F Method 510.4 Proc-1
• Compliance for Solar Radiation Test according to MIL-STD 810F Method 505.4 proc II
• Compliance for sand & dust test according to MIL-STD 810G Method 510.5 Proc 1
• Compliance for salt fog and humidity test according to MIL-STD 810F Method 509.4 and Method 507.4
• Visual corona and Radio interference Voltage(RIV)
• No Significant corona Discharge for different system Voltages and the value satisfies the technical requirements by CEA
• Solar Powered LED Type Diverter
• LED's are of orange or white colored or combination of both with adequate light intensity so that it is clearly visible from a distance of >300 m during foggy /dusty weather/under the low intensity of light.
• Battery
• Battery has a Warranty a service life of 5 years & is suitable for at least 100 hours of flashing operation by a single charge.
• Automatic power cut off circuit
• An automatic power cut off circuit is provided to improve battery life so that during day time ( due to the high intensity of light from the sun ) the circuit gets cut off & stops flashing , and the circuit switches on automatically under low intensity light conditions.
• Position of Solar cell
• The position of Solar cell is set in such a way that it gets sunlight irrespective of the direction of the diverter face , and the dust & snow does not decrease its efficiency.
• Passes general requirements for RIV -tests according to C1 14.6 of IEC 61284